//------------------------------------------------- // Shenzhen TOPWAY Technology Co.,Ltd. // LCD Module: LMT043DNFFWD-NCA // System: W78E516D(12MHz, 6T) // Display Size: 480(RGB)x272 // Driver/Controller: S1D13L01 // Interface: I/O 80mode // Date: 2016-01-23 // by Shi weiguang // note: PLL mode 10M CLKI 54M MCLK 9M PCLK //------------------------------------------------- #include #include #include #include #include #define uchar unsigned char // 8bit, 0 ~ 255 #define uint unsigned int // 16bit, 0 ~ 65,535 #define ulong unsigned long // 32bit, 0 ~ 4,294,967,295 //----------------------------------- // define I/O //----------------------------------- #define LCDBUS P1 sbit A0 = P3^3; sbit _CS = P3^1; sbit _RST = P3^2; sbit _RD = P3^4; sbit _WR = P3^5; sbit BL_ADJ = P3^6; //----------------------------------- // define 16bit colors //----------------------------------- #define RED 0xf800 #define GREEN 0x07e0 #define BLUE 0x001f #define YELLOW 0xffe0 #define CYAN 0x07ff #define MAGENTA 0xf81f #define BLACK 0x0000 #define WHITE 0xffff // #define mid_re 0x8000 #define mid_or 0x8200 #define mid_ye 0x8400 #define mid_yg 0x4400 #define mid_gr 0x0400 #define mid_gc 0x0408 #define mid_cy 0x0410 #define mid_cb 0x0210 #define mid_bl 0x0010 #define mid_bm 0x4010 #define mid_ma 0x8010 #define mid_mr 0x8008 // #define GRAY00 0x0000 #define GRAY01 0x1082 #define GRAY02 0x2104 #define GRAY03 0x3186 #define GRAY04 0x4208 #define GRAY05 0x528a #define GRAY06 0x630c #define GRAY07 0x738e #define GRAY08 0x8410 #define GRAY09 0x9492 #define GRAY10 0xa514 #define GRAY11 0xb596 #define GRAY12 0xc618 #define GRAY13 0xd69a #define GRAY14 0xe71c #define GRAY15 0xffff // //----------------------------------------------------------------------------- // 8W*8H*MONO //----------------------------------------------------------------------------- uchar code TDisplay[]={ //1//8Wx8H 0xC3,0x66,0x3C,0x18,0x18,0x3C,0x66,0xC3,}; //----------------------------------------------------------------------------- // 240W*24H*16bit_TOPWAY(mono).bmp code //----------------------------------------------------------------------------- uchar code monoLOGO[]={ 0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0x80,0x01,0xFF,0xFF,0xFF,0xE0,0x7F,0xF0, 0x07,0xFF,0xC0,0x1F,0xFC,0x00,0xFF,0xFF,0x81,0xFF,0xFC,0x00,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xF0,0x01,0xFF,0xFF,0xFF,0xF8,0x7F,0xF0,0x0F,0xFF, 0xE0,0x1F,0xFC,0x01,0xFF,0xFF,0xC0,0xFF,0xFE,0x00,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF, 0xF0,0x1F,0xFF,0xFF,0xFC,0x01,0xFF,0xFF,0xFF,0xFC,0x3F,0xF8,0x0F,0xFF,0xE0,0x3F, 0xF8,0x01,0xFF,0xFF,0xC0,0x7F,0xFF,0x01,0xFF,0xFC,0xFF,0xFF,0xFF,0xFF,0xF0,0x7F, 0xFF,0xFF,0xFF,0x01,0xFF,0xFF,0xFF,0xFE,0x3F,0xF8,0x1F,0xFF,0xF0,0x3F,0xF8,0x03, 0xFF,0xFF,0xE0,0x3F,0xFF,0x83,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xF0,0xFF,0xFF,0xFF, 0xFF,0x81,0xFF,0xFF,0xFF,0xFF,0x3F,0xF8,0x1F,0xFF,0xF0,0x3F,0xF8,0x03,0xFF,0xFF, 0xE0,0x1F,0xFF,0xC7,0xFF,0xF0,0xFF,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xC1, 0xFF,0xFF,0xFF,0xFF,0x1F,0xFC,0x3F,0xFF,0xF8,0x7F,0xF0,0x07,0xFF,0xFF,0xF0,0x0F, 0xFF,0xEF,0xFF,0xE0,0xFF,0xFF,0xFF,0xFF,0xF3,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xF0, 0x3F,0xFF,0x9F,0xFC,0x3F,0xFF,0xF8,0x7F,0xF0,0x07,0xFF,0xFF,0xF0,0x07,0xFF,0xFF, 0xFF,0xC0,0x00,0x0F,0xFF,0x00,0x03,0xFF,0xFC,0x1F,0xFF,0xE1,0xFF,0xF0,0x1F,0xFF, 0x9F,0xFC,0x7F,0xFF,0xFC,0x7F,0xF0,0x0F,0xFF,0xFF,0xF8,0x03,0xFF,0xFF,0xFF,0x80, 0x00,0x0F,0xFF,0x00,0x07,0xFF,0xF0,0x07,0xFF,0xF1,0xFF,0xF0,0x1F,0xFF,0x8F,0xFE, 0x7F,0xFF,0xFC,0xFF,0xE0,0x0F,0xFF,0xFF,0xF8,0x01,0xFF,0xFF,0xFF,0x00,0x00,0x0F, 0xFF,0x00,0x07,0xFF,0xE0,0x03,0xFF,0xF1,0xFF,0xF0,0x3F,0xFF,0x8F,0xFE,0xFF,0xFF, 0xFE,0xFF,0xE0,0x1F,0xFF,0x7F,0xFC,0x00,0xFF,0xFF,0xFE,0x00,0x00,0x0F,0xFF,0x00, 0x0F,0xFF,0xC0,0x01,0xFF,0xF9,0xFF,0xFF,0xFF,0xFF,0x0F,0xFE,0xFF,0xFF,0xFE,0xFF, 0xE0,0x1F,0xFF,0x7F,0xFC,0x00,0x7F,0xFF,0xFC,0x00,0x00,0x0F,0xFF,0x00,0x0F,0xFF, 0x80,0x00,0xFF,0xF9,0xFF,0xFF,0xFF,0xFF,0x07,0xFF,0xFF,0xFF,0xFF,0xFF,0xC0,0x3F, 0xFE,0x3F,0xFE,0x00,0x3F,0xFF,0xF8,0x00,0x00,0x0F,0xFF,0x00,0x0F,0xFF,0x80,0x00, 0xFF,0xF9,0xFF,0xFF,0xFF,0xFE,0x07,0xFF,0xFF,0xEF,0xFF,0xFF,0xC0,0x3F,0xFE,0x3F, 0xFE,0x00,0x1F,0xFF,0xF0,0x00,0x00,0x0F,0xFF,0x00,0x0F,0xFF,0xC0,0x01,0xFF,0xF9, 0xFF,0xFF,0xFF,0xFC,0x07,0xFF,0xFF,0xC7,0xFF,0xFF,0xC0,0x7F,0xFC,0x1F,0xFF,0x00, 0x0F,0xFF,0xE0,0x00,0x00,0x0F,0xFF,0x00,0x07,0xFF,0xE0,0x03,0xFF,0xF1,0xFF,0xFF, 0xFF,0xF8,0x03,0xFF,0xFF,0xC7,0xFF,0xFF,0x80,0x7F,0xFF,0xFF,0xFF,0x00,0x07,0xFF, 0xC0,0x00,0x00,0x0F,0xFF,0x00,0x07,0xFF,0xF0,0x07,0xFF,0xF1,0xFF,0xFF,0xFF,0xE0, 0x03,0xFF,0xFF,0x83,0xFF,0xFF,0x80,0xFF,0xFF,0xFF,0xFF,0x80,0x07,0xFF,0xC0,0x00, 0x00,0x0F,0xFF,0x00,0x03,0xFF,0xFC,0x1F,0xFF,0xE1,0xFF,0xF0,0x00,0x00,0x03,0xFF, 0xFF,0x83,0xFF,0xFF,0x80,0xFF,0xFF,0xFF,0xFF,0x80,0x07,0xFF,0xC0,0x00,0x00,0x0F, 0xFF,0x00,0x03,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xF0,0x00,0x00,0x01,0xFF,0xFF,0x01, 0xFF,0xFF,0x01,0xFF,0xFF,0xFF,0xFF,0xC0,0x07,0xFF,0xC0,0x00,0x00,0x0F,0xFF,0x00, 0x01,0xFF,0xFF,0xFF,0xFF,0xC1,0xFF,0xF0,0x00,0x00,0x01,0xFF,0xFF,0x01,0xFF,0xFF, 0x01,0xFF,0xFF,0xFF,0xFF,0xC0,0x07,0xFF,0xC0,0x00,0x00,0x0F,0xFF,0x00,0x00,0xFF, 0xFF,0xFF,0xFF,0x81,0xFF,0xF0,0x00,0x00,0x01,0xFF,0xFE,0x00,0xFF,0xFF,0x03,0xFF, 0xFF,0xFF,0xFF,0xE0,0x07,0xFF,0xC0,0x00,0x00,0x0F,0xFF,0x00,0x00,0x7F,0xFF,0xFF, 0xFF,0x01,0xFF,0xF0,0x00,0x00,0x00,0xFF,0xFE,0x00,0xFF,0xFE,0x03,0xFF,0xE0,0x03, 0xFF,0xE0,0x07,0xFF,0xC0,0x00,0x00,0x0F,0xFF,0x00,0x00,0x1F,0xFF,0xFF,0xFC,0x01, 0xFF,0xF0,0x00,0x00,0x00,0xFF,0xFC,0x00,0x7F,0xFE,0x07,0xFF,0xC0,0x01,0xFF,0xF0, 0x07,0xFF,0xC0,0x00,0x00,0x0F,0xFF,0x00,0x00,0x07,0xFF,0xFF,0xF0,0x01,0xFF,0xF0, 0x00,0x00,0x00,0xFF,0xFC,0x00,0x7F,0xFE,0x07,0xFF,0xC0,0x01,0xFF,0xF0,0x07,0xFF, 0xC0,0x00,0x00,0x0F,0xFF,0x00,0x00,0x00,0xFF,0xFF,0x80,0x01,0xFF,0xF0,0x00,0x00, 0x00,0x7F,0xF8,0x00,0x3F,0xFC,0x0F,0xFF,0x80,0x00,0xFF,0xF8,0x07,0xFF,0xC0,0x00}; // //----------------------------------------------------------------------------- // 240W*24H*16bit_LMT043DNFFWU-NCA(mono).bmp code //----------------------------------------------------------------------------- uchar code monoModule[]={ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x83,0xCF,0x7F,0x87,0x80,0x60,0xF8, 0xFE,0x3D,0xEF,0xF3,0xFC,0xFF,0xFF,0x80,0x03,0xDE,0x1F,0x83,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0xCE,0x6D,0x8C,0xC0,0xE1,0x8C,0x63,0x1C, 0xC6,0x19,0x86,0x6D,0x98,0xC0,0x01,0xCC,0x31,0x83,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x03,0x01,0xCE,0x6D,0x98,0x61,0xE1,0x8C,0x61,0x9C,0xC6,0x61, 0x98,0x6D,0x98,0x60,0x01,0xCC,0x31,0x87,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x03,0x01,0xCE,0x0C,0x18,0x63,0x60,0x18,0x61,0x9E,0xC6,0x61,0x98,0x6D, 0x98,0x60,0x01,0xEC,0x60,0x07,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x03,0x01,0xFE,0x0C,0x18,0x63,0x60,0x70,0x61,0x9E,0xC7,0xE1,0xF8,0x6D,0x98,0x67, 0xF9,0xEC,0x60,0x07,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01, 0xFE,0x0C,0x18,0x66,0x60,0x18,0x61,0x9B,0xC6,0x61,0x98,0x7F,0x98,0x60,0x01,0xBC, 0x60,0x0C,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0xFE,0x0C, 0x18,0x66,0x60,0x0C,0x61,0x9B,0xC6,0x61,0x98,0x7F,0x98,0x60,0x01,0xBC,0x60,0x0F, 0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0xB6,0x0C,0x18,0x63, 0xF0,0x0C,0x61,0x9B,0xC6,0x01,0x80,0x7F,0x98,0x60,0x01,0xBC,0x60,0x0C,0xC0,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0xB6,0x0C,0x18,0x60,0x61,0x8C, 0x61,0x99,0xC6,0x01,0x80,0x33,0x18,0x60,0x01,0x9C,0x61,0x98,0x60,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x19,0xB6,0x0C,0x0C,0xC0,0x61,0x8C,0x63,0x19, 0xC6,0x01,0x80,0x33,0x18,0xC0,0x01,0x9C,0x33,0x18,0x60,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x07,0xFB,0xFF,0x1E,0x07,0x81,0xF8,0xF8,0xFE,0x3C,0xCF,0x03, 0xC0,0x33,0x3F,0x80,0x03,0xCC,0x1E,0x3C,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, }; // //----------------------------------------------------------------------------- // delayms routine // Parameter£ºm = time in ms //----------------------------------------------------------------------------- void delayms(uint m) // 12MHz Crystal, close to ms value { uint j; uint i; for(i=0; i>8; Ddata18=Command>>16; A0 = 0; _CS = 0; LCDBUS = Command; // Write the 1st lower 8bit(A7-0) _WR = 0; _WR = 1; LCDBUS = Ddata15; // Write the 2nd lower 8bit(A15-8) _WR = 0; _WR = 1; LCDBUS = Ddata18; // Write the highest 3bit(A18-16) _WR = 0; _WR = 1; _CS=1; } // //----------------------------------------------------------------------------- // Write 16bit Data Command routine // Parameter£ºWrite Data // 1. Write the low 8bit // 2. Write the high 8bit //----------------------------------------------------------------------------- void SdData(uint DData) { A0 = 1; _CS = 0; LCDBUS = DData; // Write the low 8bit(D7-0) _WR = 0; _WR = 1; LCDBUS = DData>>8; // Write the high 8bit(D15-8) _WR = 0; _WR = 1; _CS=1; } // //----------------------------------------------------------------------------- // Fill full screen routine // Parameter£ºfill color // 1. Write the start Address // 2. Write the Horizontal Data // 3. Change the next Horizontal Address // 4. Write next Horizontal Data //----------------------------------------------------------------------------- void FillFullScn(uint color) { ulong addr; uint i,j; addr=0; for(i=0;i<272;i++) // { SdCmd(addr); // Write the start Address for(j=0;j<480;j++)// { SdData(color); // Write the Horizontal Data } addr=addr+960; //640 // Next Horizontal Address } } // //----------------------------------------------------------------------------- // Fill Box routine // Parameter£ºfill color,start position of X,start position of Y, width of Box, High of Box // 1. Write the start Address // 2. Write the Horizontal Data // 3. Change the next Horizontal Address // 4. Write next Horizontal Data //----------------------------------------------------------------------------- void FillBox(uint color,x,y,w,h) { ulong addr; uint i,j; addr=960; //640 addr=addr*y; addr=addr+x*2; for(i=0;i CLKI = 10 MHz / 5 => 2MHz SdCmd(0x60814); SdData(0x0018); // L = 0x18 => POCLK = 2MHz * 27 = 54 MHz SdCmd(0x60810); SdData(0x0001); // Dont Enable PLL, Bypass delayms(100); SdCmd(0x60816); SdData(0x0006); // With PLL: PCLK := 54MHz / 6 = 9MHz SdCmd(0x60804); SdData(0x0001); // Enable Memory Power / Clock delayms(100); // Panel setting SdCmd(0x60820); SdData(0x008F); // DE is low, Data ready on PCLK rising edge, 24bit enabled SdCmd(0x60822); SdData(0x0001); // TE is off, Inverted Data SdCmd(0x60824); SdData(0x003C); // The display period of HS = 480/8 = 60 SdCmd(0x60826); SdData(0x002D); // The empty period of HS = 525-480=45 SdCmd(0x6082c); SdData(0x0002); // HS Polarity = 0, Pulse width = 2 SdCmd(0x6082e); SdData(0x0002); // The start position of HS = 2 SdCmd(0x60828); SdData(0x0110); // The display period of VS = 272 SdCmd(0x6082a); SdData(0x000D); // The empty period of VS = 285-272=13 //old TFT is set to 0x000E, new TFT is set to 0x000D SdCmd(0x60830); SdData(0x0002); // VS Polarity = 0, Pulse width = 2 SdCmd(0x60832); SdData(0x0002); // The start position of VS = 2 // Main Panel RAM setting SdCmd(0x60840); SdData(0x0001); // Main Panel&PIP enable, and Main Panel display data is RGB=5:6:5 SdCmd(0x60842); SdData(0x0000); // The start Address of Main Panel = 00000h SdCmd(0x60844); SdData(0x0000); // // PIP RAM setting SdCmd(0x60850); SdData(0x0001); // PIP display data is RGB=565 SdCmd(0x60852); SdData(0xFF70); // The start Address of PIP Panel = 3FF70h SdCmd(0x60854); SdData(0x0003); // SdCmd(0x60856); SdData(0x0064); // Display width of PIP = 100 SdCmd(0x60858); SdData(0x0039); // Display width of PIP = 57 SdCmd(0x6085a); SdData(0x0000); // The start position of X of PIP = 0 SdCmd(0x6085c); SdData(0x0000); // The start position of Y of PIP = 0 SdCmd(0x60860); SdData(0x0000); // No PIP SdCmd(0x60862); SdData(0x0000); // SdCmd(0x60864); SdData(0x0000); // Transparency disable SdCmd(0x60866); SdData(0x0000); // Transparency Key Color setting SdCmd(0x60868); SdData(0x0000); // Transparency Key Color setting //GPIO setting SdCmd(0x608D0); SdData(0x0007); // GPIO3 is input, GPIO[2:0] are output SdCmd(0x608D2); SdData(0x0007); // GPIO[2:0] output high,TFT display normal mode SdCmd(0x60804); SdData(0x0002); // PSM1 Mode, Enable Mem and Panel Clock delayms(100); } // //----------------------------------------------------------------------------- // Main program // 1. I/O initialization // 2. Reset MCU // 3. LCD initialization // 4. Loop Fill Picture //----------------------------------------------------------------------------- void main() { EA=0; // no interrupt _WR=1; _RD=1; _CS = 1; BL_ADJ=0; // Close the Backlight of TFT _RST=1; delayms(100); // wait for all power stable _RST=0; delayms(100); // reset pulse _RST=1; delayms(800); // wait till internal reset routine finish initLCM(); // LCD initialization BL_ADJ=1; // Open the Backlight of TFT FillFullScn(BLACK); FillBox(mid_re, 19, 18, 103,53); FillBox(mid_or, 132, 18, 103,53); FillBox(mid_ye, 245, 18, 103,53); FillBox(mid_yg, 358, 18, 103,53); FillBox(mid_gr, 358, 79, 103,53); FillBox(mid_gc, 358, 140, 103,53); FillBox(mid_cy, 358, 201, 103,53); FillBox(mid_cb, 245, 201, 103,53); FillBox(mid_bl, 132, 201, 103,53); FillBox(mid_bm, 19, 201, 103,53); FillBox(mid_ma, 19, 140, 103,53); FillBox(mid_mr, 19, 79, 103,53); monoFill(24, 30, 120, 114, GRAY04, BLACK, monoLOGO); monoFill(24, 30, 120, 140, GRAY04, BLACK, monoModule); delayms(100); while(1); } // //----------------------------------------------------------------------------- // End off //-----------------------------------------------------------------------------